3.5 mm
Profile thickness
Heavy-duty steel profile configuration used in the completed system.
Monolit Komplekt · Wall Formwork System
Large-panel formwork
3.5 mm heavy-duty system
Heavy-duty large-panel wall formwork for reinforced concrete construction. We configure the system for the specific project and coordinate manufacturing at specialized production facilities capable of delivering the required technical configuration.
100 kN/m
Allowable load
Documented for the ST-120 3.5 configuration according to the manufacturer's technical documentation.
≤ L/400
Deflection
Maximum deflection at the allowable load according to the technical documentation.
400+
Reuse cycles
More than 400 cycles stated for panels of this configuration in the manufacturer's documentation.
Technical specifications
ST-120 3.5 completed configuration
The parameters below are based on the manufacturer's technical documentation for a previously completed system. Specifications for each new production batch are confirmed by the documentation of the actual manufacturing facility.
Profile
120 × 60 mm
Profile thickness
3.5 mm
Allowable load
100 kN/m
Deflection
≤ L/400
Reuse cycles
More than 400
Panel height
0.6–3.3 m
Panel width
0.2–2.4 m
System design
Heavy-duty panels as part of a complete formwork system
We approach the panel as part of an integrated formwork system rather than as an isolated steel component. Frames, facing, connections, braces and tie components must work together as one engineered system.
120 × 60 mm steel profile
3.5 mm steel profile thickness
St3 structural steel
18 mm laminated plywood facing
Drainage holes integrated into the profile design
Facing fixed with screws or rivets depending on configuration
Compatible locks, braces, tie components and system accessories
Real equipment
Not a catalogue concept. A system that has actually been built.
Formwork in this configuration has already been manufactured and supplied for a construction project. The photographs on this page show actual panels from the completed equipment batch.
New projects can therefore be discussed using an existing technical configuration as a reference rather than relying solely on a catalogue description.
View the project
Configuration control
Key parameters can be checked on the actual product
For this heavy-duty configuration, one of the key parameters is the 3.5 mm steel profile thickness. Inspection of the physical product provides direct confirmation of the delivered configuration.
Verified configuration
3.5 mm
Technical documentation
Documentation and specification verification
The technical parameters shown on this page are based on manufacturer documentation for the completed ST-120 3.5 configuration. Documentation for new production is tied to the actual manufacturing facility and final order specification.
Profile thickness
3.5 mm
Allowable load
100 kN/m
Deflection
≤ L/400
Reuse cycles
More than 400
Documentation for each supply
Passports, certificates and accompanying documentation are provided according to the actual manufacturer and configuration of the specific production batch.
Production model
The system is not tied to a single production facility
Manufacturing can be placed with specialized production facilities capable of meeting the required technical configuration and project volume.
Monolit Komplekt defines the system configuration and equipment requirements, coordinates the required execution and organizes project supply.
Technical passports, certificates and supporting documentation correspond to the actual manufacturer and specific production batch.
Monolit Komplekt
Configure a large-panel formwork system for your project
Send us wall drawings, a bill of quantities or the main project parameters. We can review panel sizes, accessories, system configuration and production options.
Send project requirements